It comes with 510/eGo threading, it works with a variety of 510/eGo threaded atomizers, tanks systems,
and clearomizers/cartomizer.
The battery allows you to adjust voltage output from 3.3v to 4.8v by spinning the knob at the bottom.
Each increment is 0.1v.1. It comes with 510/eGo thread.
CHARGER NOT INCLUDED.
Using the battery at a higher voltage output will drain the battery faster than at a lower voltage.
We suggest you to start with a low voltage and increase the voltage gradually until you find the
right voltage for your atomizer/cartomizer.
| Including: | |
| Rainbow Vision Spinner 650mAh eGo Variable Voltage Battery | 1 pc |
| Size: | |
| length | 93mm |
| diameter | 14mm |
5-Click protection: Generally, the battery is shipped in the off position. In off position, it will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see white LED flash. To turn off battery, press manual button 5 times within 2 second as well, the white LED will flash! "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!
Cut off time: If the button is pressed for 10 seconds, the battery will shutoff until the button is released.
Short Circuit Protection: When a short is detected, the battery will shutdown until the short is removed.
Low Voltage Protection: When the battery voltage is lower than 3.3v, the battery will shut down.
Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it.
The LED will blink 5 times indicating that a charge is need.
How to adjust the output voltage?
There are 16 grids on the knob at the bottom, and each represents 0.1. Spin the knob in a clockwise
direction to increase output voltage and spin the knob in anti-clockwise direction to decrease output
voltage. High output voltage gives more vapor.
