Just add the 1st/2nd/3rd/4th choice of flavour
and strength to the order notes.
The Vision X.Fir E-Flare 18350/18650 VV (Variable Voltage) MOD.
The Unit comes with two 10ml juice tubes and is installed with the completely clear one.
This is not a squeezable tube, you simply invert the mod momentarily to 'juice' the replaceable
coil heads. The E-Flare features a well and any excess juice drops back down into the side tube.
The E-Flare is solidly built of 304 Pure Stainless Steel.
The Kit comes with two Dual Coil Vivi Nova heads 1.5/1.8ohm.
The unit holds a WHOPPING 10 ml of juice.
Even though Vision states you can fill this to 10ml,
we recommend to fill only 8-9ml within the tube.
The kit comes with an extra decorative metal sleeved fill tube.
There are no special E-Flare heads to use in this unit and even though the E-Flare comes with dual
coil Nova heads we see no reason why you cannot use the Vivi Nova single coils on this unit.
You can use IMR 18650 flat or button top batteries but the E-Flare also comes with a 18350 adapter
that screws into the bottom of the vented battery tube. Once installed you can then use IMR 18350
flat or button top batteries. This kit does not come with any batteries.
HOW DO YOU CHANGE VOLTAGES?
A bottom feeding mod that you can change the voltage of your vape!
No LCD screens and menus to operate. With the E-Flare you simply turn the knob at the top
(which also doubles as your firing button) lining up the red vertical mark to the desired voltage on the dial.
You will of course want to periodically check that, while you are vaping, you do not inadvertently change
your voltage as the dialing action is not ratcheted but is more free flowing. This means you can do infinite
variations of voltage between 3.3 and 4.8 volts.
What You Receive with your Vision X.Fir E-Flare VV Bottom/Self Feeding Mod Kit:
- One 304 Stainless X.Fir E-Flare VV MOD body.
- One 10ml Plastic eJuice Tank/Tube
- One Metal Decorative eJuice Tank/Tube.
- 18350 screw-on battery connector/adapter.
- Two Dual Coil Nova Heads (1.5/1.8ohm)
- Black plastic fluted mouthpiece. You can also use your own 510 drip tip
- Full Color Manual & sturdy presentation packaging. Very easy to open, it slips in and out.
Specifications, Dimensions & Safety Features:
- Body Material: 304 Stainless.
- Dimension: 175mm by 45 mm.
- Operating Voltage: 3.3V-4.8V.
- Battery: 18350 and 18650 IMR batteries can be used.
- Variable Voltage: Voltage can be adjusted from 3.3 – 4.8 volts.
- Short Circuit Protection.
- Reverse Battery Protection Circuit.
- Battery safety protection.
- Capacity of 10ml. But this is measured all the way to the top of the tube.
- To remove tube you just 'wiggle' it off.
