Kangertech K-KISS Starter Kit is a powerful vaping device with a 6300mah built-in battery and 4.5ml e-juice capacity. Users can enjoy a longer time vaping without troublesome charging and refilling. The K-Kiss supports a full power output just like a mechanical mod. It also features a new symmetrical airflow design, easy top filling, SSOCC coils and a replaceable pyrex glass tube. With a durable finish, you will have an excellent and comfortable grip.
Parameters:
K-Kiss MOD
Size: 83mm x 40mm
Battery: Built-in 6300mAh
Casing: Zinc alloy and Aluminum Alloy
Resistance: above 0.15 Ohm
Output: Full power output
Charging: Micro USB/DC 5V 1000mA
K-Kiss Tank
Size:24mm (D) x 39mm (H, without thread or drip tip)
Capacity: 4.5mL
Coil: SSOCC SS 0.2 Ohm coil
It comes with
- 1x k-kiss MOD
- 1x k-kiss Tank (pre-installed 0.2ohm coil)
- 1x SSOCC SS 0.5 Ohm coil
- 1x Micro USB cable
- 1x Manual
- 1x Set of seal ring
- 1x Pyrex glass
- It doesn't come with e-liquids. You shall buy separately.
- You can buy SSOCC coils separately.
Features:
New symmetrical air flow design
Top filling with 4.5ml capacity
SSOCC coils
Durable finish, excellent hand feel
6300mAh build in Li-battery
Replaceable Pyrex glass
Guide:
1. 5 speedy clicks on fire button to switch on/off.
2. Once switched on the battery, top LEDs will flash and show battery level. 5 LED lights up when fully charged.
3. LED lights on when press the fire button, lights off when switched off and atomizer will stop function.
4. LED will flash 3 times when when atomizer resistance value is less than 0.15ohm or short circuit.
5. Battery will stop function automatically when 10s overused and LED flashes.
6. LED will flash 15 times and stop functioning when battery is drained out.
7. LED will flash 6 times when PCB is overheated.
8. LED lights will flash while charging, and stops once fully charged up.
