The Aspire ESP 30w is Aspires first box mod. You can adjust the output power
between 5 and 30 watts by twisting the rotary knob on the top of the device.
Its powered by an internal 1900mah LiPo battery. The front of the device
has an LED screen to display things like output power, atomizer resistance,
and battery power level.
The output power on the Aspire ESP 30w AND you can sub-ohm down to 0.3ohms.
The ESP 30w also features a micro USB port to recharge the internal battery and
a floating 510 center pin.
ESP 30w Features:
- Lightweight and durable with a carbon fiber wrap and finish
- Easy to read screen shows wattage, voltage, resistance and battery life
- Conveniently positioned knurled top dial enables easy wattage adjustment
- Fires from 5 to 30 watts in increments of 1 watt
- Locking and unlocking is as easy as 5 rapid presses of the firing button
- Fires resistances as low as 0.3 ohms, powering your favorite atomizers
- Self adjusting 510 for convenient and hassle-free atomizer mounting
- Micro-USB Charging Port with USB Pass-Through Capability
Specifications:
- Size: 83mm x 23mm x45mm
- Wattage output: 5W – 30W
- Threading: 510 Connection
- Minimum Rated Resistance Range: 0.3 ohms
BASIC INSTRUCTIONS:
Power on and off: Click Fire Button 5 times within 2 seconds to lock or unlock the mod.
Variable Wattage: Turn the rotary knob at the top of the mod clockwise or counter
clockwise to increase or decrease the output wattage from 5W to 30W.
Screen display: The Screen will display the battery power, resistance of atomizer, wattage
and voltage. When the atomizer is not detected, the Screen will display “Check atomizer”.
When the mod is in low power, the Screen will display “Check battery”.
Pass-through: The mod is charged by micro USB cable; the light is red when charging
and it will turn to green when fully charged. You can use the Mod while its charging.
Always keep your Mod clean and free of dirt and oil. Periodically clean the 510
threads and positive contact point with a paper towel or Q-Tip.
